How to apply the Smart Chip

Here, we’ll guide you step by step through the process of safely and professionally applying the smart chip to the finger nail.

You’ll learn what to focus on at each stage to ensure the final result looks great and functions flawlessly.

Watch the training video

Preparation

Before applying the Smart Chip, we have to prepare the nail surface.

You will need:

Shortener File

SC Bonder

SC Builder Low

SC Pyramid

Pads

Acetone

UV lamp

Step 1

Prepare the nail

Matt the surface of the nail lightly using the shortener file.

If necessary, file the nail into shape using the same file.

Step 2

Remove the filing dust

Clean the nail and remove all filing dust using acetone.

Step 3

Primer (optional)

If necessary, apply primer.

Step 4

First Bonder

Apply a thin layer of First Bonder over the whole nail.

The bonder creates a surface on the nail that provides good adhesion for the builder.

Step 5

Air dry

Let the bonder air dry for approx. 60 seconds.

Use this time to talk to the customers about your other services.

Step 6

Builder Low

Apply Builder Low (low viscosity) over the whole nail. This gel layer prevents direct contact between the Smart Chip and the natural nail, which could lead to fungal infections.

Important: NEVER apply the Smart Chip directly to the natural nail.

Step 7

Curing

Cure the builder for approx. 60 seconds under UV light.

Step 8

Remove the inhibition layer

Remove the inhibition layer using aceton.

We use aceton instead of cleaner because it degreases the nail, which is very important for the Smart Chip to adhere properly.

Step 9

SC Pyramid

Place the customer’s finger on the SC Pyramid. The pyramid places the finger at the perfect height and position for the next steps.

Applying the Smart Chip

Now that the nail surface is prepared, we are ready to apply the Smart Chip.

You will need:

SC Stripe

SC Pyramid

Step 1

Prepare the Stripe

The Smart Chip comes on an adhesive tape. We call this the “Stripe“.

Peel the backing paper off the stripe.

Step 2

Positioning

Position the Smart Chip correctly over the nail:

Center the Smart Chip vertically on the nail
Align the stripe with the back edge of the nail
The Smart Chip should be positioned about 3 mm from the cuticle line

Step 3

Pull the Stripe down

Hold the stripe on both ends and pull it firmly down for 5 to 10 seconds.

This gives the adhesive time to bond with the gel.

Removing the Stripe

The correct removal of the stripe is very important to ensure that the Smart Chip adheres properly and doesn’t lift.

Step 1

Grab the stripe on one end …

Step 2

… fold it diagonally over the nail …

Step 3

… and slowly pull it sideways and down.

Never pull the Stripe up. You could lift the Smart Chip from the nail, rendering it useless.

Building

Now that the Smart Chip is on the nail, we need to make sure that it stays there.

It’s very important to do the following two steps immediately afer removing the Stripe and as quickly as possible, so that the Smart Chip does not lift from the fingernail.

You will need:

SC Builder High

SC Finish

Sealer file

Cleaner

Pads

UV lamp

Step 1

Builder High

Apply the Builder High (high viscosity) over the entire nail and Smart Chip, ensuring the Smart Chip is fully covered. This “glues” it to the nail.

Speed is more important than perfection at this stage – any imperfections can be corrected afterward.

Work quickly and cure the nail immediately under UV light to prevent the Smart Chip from coming loose.

Step 2

Curing the builder

Cure the Builder High for approx. 60 seconds under UV light.

Remove the inhibition layer with cleaner afterwards.

Step 3

Finish

You can now correct any imperfections using SC Finish. Aim for a smooth surface and good adhesion.

Cure under UV light for approx. 60 seconds and remove the inhibition layer with cleaner.

Step 4

Seal the nail edge

As the last step, seal the nail edge using the sealer file.

If necessary, correct the side lines with the shortener file first.

Finished!

Done! The application of the Smart Chip is complete.

You can now apply color, cuticle oil or hand lotion according to the customer’s wishes.